Motor Driver

From STEAMwiki
Revision as of 19:01, 3 May 2018 by Andy (talk | contribs) (Created page with "Wiring: Module 5V (or Vcc) - Vin or Arduino 5V pin Module GND - Arduino GND pin Module 12V (or Vbat) - To external power source up to 35V. Or Vin if no external power. Modul...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Wiring:

Module 5V (or Vcc) - Vin or Arduino 5V pin Module GND - Arduino GND pin Module 12V (or Vbat) - To external power source up to 35V. Or Vin if no external power. Module output 1 & 2 - Connect dc motor A Module output 3 & 4 - Connect dc motor B Module IN1 - Arduino pin A1 Module IN2 - Arduino pin A2 Module IN3 - Arduino pin A3 Module IN4 - Arduino pin A4