Motor Driver

From STEAMwiki
Jump to: navigation, search

Wiring:

  • Module 5V (or Vcc) - Vin or Arduino 5V pin
  • Module GND - Arduino GND pin
  • Module 12V (or Vbat) - To external power source up to 35V. Or Vin if no external power.
  • Module output 1 & 2 - Connect dc motor A
  • Module output 3 & 4 - Connect dc motor B
  • Module IN1 - Arduino pin A1
  • Module IN2 - Arduino pin A2
  • Module IN3 - Arduino pin A3
  • Module IN4 - Arduino pin A4